Record the project context
Note the room function, project country, required lighting tasks, and the surfaces that need light.
48V PROJECT GUIDE / SPECIFICATION
Plan a traceable 48V magnetic track lighting enquiry
This UNALLUX B2B guide helps you record the track layout, MAXLED models, quantities, and known technical values without guessing missing data.
Bottom line
Start with the plan, not an isolated luminaire
A usable 48V project enquiry describes the room and lighting task, track route, mounting method, selected MAXLED model codes, quantities, and only the technical values stated in the source.
The exact rail, driver, connected load, luminaire, and control combination is confirmed for the project before ordering.Recommended sequence
Six steps to a traceable product specification
Draw the track route
Mark the mounting method, rail direction, lengths, corners, interruptions, and intended power-feed points on the plan.
Select from source values
Compare MAXLED model code, wattage, lumens, CCT, CRI, and dimensions only where those values are stated in the catalog.
Calculate the known load
Multiply documented luminaire wattage by quantity. Mark a missing wattage as unknown instead of estimating it.
Confirm the system combination
Bundle rail, driver, luminaires, and quantities. Request separate confirmation of electrical and mechanical compatibility and the required reserve.
Send one reviewable list
Share model codes, quantities, plan, and open questions through the quote list, protected form, or WhatsApp.
Decision matrix
What belongs in the project record?
- Room and lighting task
- Room function, target surfaces, desired atmosphere, and known project constraints.
- Rail and mounting
- Rail type, mounting method, route, lengths, corners, connectors, and power-feed points.
- Luminaires
- Exact MAXLED model codes, quantities, and published technical values only.
- Connected load
- The sum of documented wattage multiplied by quantity; missing values remain visibly unknown.
- Driver and control
- Requested driver, feed position, and control requirement, subject to project confirmation.
- Commercial confirmation
- Project price, stock, lead time, warranty, and conformity documents are confirmed per enquiry.
Enquiry pack
Send these eight items for a focused response
A complete first enquiry reduces follow-up questions but does not replace installation or compatibility review.
- 01Project country and city or region, without unnecessary personal data.
- 02Room function and a plan showing the intended track route.
- 03Known ceiling construction, mounting method, and relevant dimensions.
- 04Requested MAXLED model codes and quantities.
- 05Known lumen, CCT, CRI, or dimensional requirements.
- 06Required switching, dimming, or control function, where relevant.
- 07Requested delivery period and current project stage.
- 08Open questions about compatibility, warranty, or conformity documents.
Avoid rework
Six checks before an order
Preserve product identity
Use the published MAXLED name and model code; do not rename a product in the project record.
Do not mix systems by appearance
A similar shape or voltage does not prove electrical or mechanical compatibility.
Do not invent missing values
Leave an unknown technical field open and request source confirmation.
Check the total load
Do not select a driver before quantities and documented wattages have been combined.
Include rail components
Record the route, connectors, and feed points instead of counting luminaires alone.
Confirm before installation
Have the final system combination and fixed electrical work checked by qualified professionals.
UNALLUX / MAXLED / 48V
A project guide, not installation instructions
This page structures information for a B2B enquiry. Always use current official documentation and a qualified installer or project professional for mounting and electrical connections.
48V / B2B
Turn the project information into a product list
Review the documented MAXLED models first, then send model codes, quantities, and project context in one enquiry.